V-Belt Driven Live Roller Spurs
- Diverging or converging applications
- Positive alignment of package
- Right and Left Hand Units Available
Bed - Roller bed width between rails 15", 21", 27", 33" and 39". 7-1/2" x 1-1/2" x 12 gauge powder painted formed steel channel frame.
Tread Rollers - 2-1/2" diameter tapered to 1-11/16" diameter plated and 1.9" diameter x 16 gauge plated steel tread rollers, 7/16" hex shaft.
Pressure Sheaves - 3" diameter x 3/8" bore, adjustable to give required driving force.
Take-Up - Screw take-up provided to insure proper V-belt tension. Mounted underneath conveyor.
Tangent - 12" long, on one end of curved spur.
Floor Supports - Adjustable 31-1/2" to 45-1/2" from floor to top of rollers.
End Drive - Mounted below bed section.
Bearings - Sealed prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - 540 Ibs. total distributed live load.
Item # |
Type |
Overall Width |
Width bethween Frames |
A at 45º |
A at 30º |
B at 45º |
B at 30º |
---|---|---|---|---|---|---|---|
190CLRS-15" |
Curve Spur |
18 in |
15 in |
54 1/8 in |
59 1/8 in |
45 1/8 in |
65 5/8 in |
190CLRS-21" |
Curve Spur |
24 in |
21 in |
58 3/8 in |
64 3/8 in |
55 3/8 in |
80 5/8 in |
190CLRS-27" |
Curve Spur |
30 in |
27 in |
62 1/2 in |
69 1/2 in |
65 5/8 in |
95 5/8 in |
190CLRS-33" |
Curve Spur |
36 in |
33 in |
77 3/4 in |
88 1/8 in |
80 3/8 in |
118 3/8 in |
190CLRS-39" |
Curve Spur |
42 in |
39 in |
82 in |
93 3/8 in |
90 5/8 in |
133 3/8 in |
190CLRSS-15" |
Straight Spur |
18 in |
15 in |
27 in |
40 in |
25 1/2 in |
38 1/2 in |
190CLRSS-21" |
Straight Spur |
24 in |
21 in |
36 in |
52 in |
34 1/2 in |
50 1/2 in |
190CLRSS-27" |
Straight Spur |
30 in |
27 in |
45 in |
64 in |
43 1/2 in |
62 1/2 in |
190CLRSS-33" |
Straight Spur |
36 in |
33 in |
53 in |
76 in |
51 1/2 in |
74 1/2 in |
190CLRSS-39" |
Straight Spur |
42 in |
39 in |
61 in |
88 in |
59 1/2 in |
86 1/2 in |