V-Belt Driven Live Roller Curves

  • Transports around turns with positive alignment of package
  • Can be slave driven from Flat Belt Driven Live Roller Conveyor
Driving belt – "B" section V-belt.
Bed – 2 1/2" diameter tapered to 1 11/16" diameter x 14 gauge wall plated tread rollers. 7/16" hex shafts. Steel pressure sheaves. Mounted in 7" x 1 1/2" x 12 gauge powder painted formed steel channel frame.
Floor supports – Adjustable 31 1/2" to 45 1/2" from floor to top of rollers. One support at each end, and center leg on outer rail.
Take-up – Screw take-up provided to insure proper V-belt tension. Mounted underneath conveyor.
Tangent – 12" long, one on each end.
End Drive – Mounted below bed section.
Bearings – Sealed prelubricated with cast iron housings.
Speed reducer – C-face mounted heavy duty worm gear reducer.
Sort by
Display
per page

Item #

Width bethween Frames

Motor

Belt Speed

Capacity<sup>1</sup>

190CLR-15"

15 in

1/2 hp 230/460-3-60 TE motor

60 fpm

540 lb

190CLR-21"

21 in

1/2 hp 230/460-3-60 TE motor

60 fpm

540 lb

190CLR-27"

27 in

1/2 hp 230/460-3-60 TE motor

60 fpm

540 lb

190CLR-33"

33 in

1/2 hp 230/460-3-60 TE motor

60 fpm

540 lb

190CLR-39"

39 in

1/2 hp 230/460-3-60 TE motor

60 fpm

540 lb