Trough Slider Bed 15'-24", HEAVY DUTY SLIDER BED CONVEYOR

Bed Length 15 ft
Overall Length 15 ft 10 in
Belt Width 24 in
Overall Width 28 in
Bed Width 25 in
Weight 570 lb
Diameter Drive Pulley 4 in
Belt Material black PVC 120 belt
Standard Color ACSI Green
ACSI Gray
ACSI White
ACSI Dark Blue
ACSI Tan
ACSI Black
Motor 1/2 hp 230/460-3-60 TE motor
Belt Speed Constant 60 fpm
Load Capacity at 1/2 hp 435 lb
Load Capacity at 3/4 hp 435 lb
Load Capacity at 1 hp1 435 lb
Note 11 hp max. for this model.
  • Conveys boxes, bags, cases and loose parts
  • Built in guard rails allow overhead conveying


Bed – 12 gauge powder painted formed steel with 2 1/2" high vertical sides bolted to top of bed. Standard sections are 5 and 10 feet long bolted together with floor supports and splice plates.
Tail pulley – 4" diameter crowned with 1 3/16" diameter shaft.
Drive pulley – 4" diameter and 8" diameter crowned and fully lagged. 4" diameter pulley with 1 3/16" diameter shaft, 8" diameter pulley with 1 7/16" diameter shaft.
Snub-roller – 2" diameter for 4" diameter pulley, 2 1/2" diameter for 8" diameter pulley.
Return idler – 1.9" diameter adjustable, on 10' 0" centers.
Floor supports – Adjustable 28 1/2" to 42 1/2" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
Take-up – 6" long screws located at tail pulley to provide belt tension.
Bearings – Sealed-prelubricated with cast iron housings.
Speed reducer – C-face mounted heavy duty worm gear reducer.
Capacity – Maximum load per lineal foot of conveyor - 75 pounds. Not to exceed Load capacity.