Trough Slider Bed 10'-8", HEAVY DUTY SLIDER BED CONVEYOR

Bed Length 10 ft
Overall Length 10 ft 10 in
Belt Width 8 in
Overall Width 12 in
Bed Width 9 in
Weight 320 lb
Diameter Drive Pulley 4 in
Belt Material black PVC 120 belt
Standard Color ACSI Green
ACSI Gray
ACSI White
ACSI Dark Blue
ACSI Tan
ACSI Black
Motor 1/2 hp 230/460-3-60 TE motor
Belt Speed Constant 60 fpm
Load Capacity at 1/2 hp 435 lb
Load Capacity at 3/4 hp 435 lb
Load Capacity at 1 hp1 435 lb
Note 11 hp max. for this model.
  • Conveys boxes, bags, cases and loose parts
  • Built in guard rails allow overhead conveying


Bed – 12 gauge powder painted formed steel with 2 1/2" high vertical sides bolted to top of bed. Standard sections are 5 and 10 feet long bolted together with floor supports and splice plates.
Tail pulley – 4" diameter crowned with 1 3/16" diameter shaft.
Drive pulley – 4" diameter and 8" diameter crowned and fully lagged. 4" diameter pulley with 1 3/16" diameter shaft, 8" diameter pulley with 1 7/16" diameter shaft.
Snub-roller – 2" diameter for 4" diameter pulley, 2 1/2" diameter for 8" diameter pulley.
Return idler – 1.9" diameter adjustable, on 10' 0" centers.
Floor supports – Adjustable 28 1/2" to 42 1/2" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
Take-up – 6" long screws located at tail pulley to provide belt tension.
Bearings – Sealed-prelubricated with cast iron housings.
Speed reducer – C-face mounted heavy duty worm gear reducer.
Capacity – Maximum load per lineal foot of conveyor - 75 pounds. Not to exceed Load capacity.