SBT 48", SLIDER BED TRASH CONVEYOR

Diameter Drive Pulley 8 in
Diameter Tail Pulley 6 in
Belt Width 48 in
Bed Width 50 in
Weight 10' 10" OAL 1650 lb
Weight per Foot 51 lb
Driving Belt Material black PVC 90 belt
Standard Color ACSI Green
ACSI Gray
ACSI White
ACSI Dark Blue
ACSI Tan
ACSI Black
Motor 1/2 hp 230/460-3-60 TE motor
Belt Speed 60 fpm
Load Capacity at 1/2 hp 435 lb
Load Capacity at 3/4 hp 650 lb
Load Capacity at 1 hp 810 lb
Load Capacity at 1 1/2 hp 1080 lb
Load Capacity at 2 hp 1300 lb
  • Adjustable floor supports
  • Inclie to 15 degrees
  • Guard rails


Bed – 5 1/2" deep x 14 gauge powder painted formed steel channel frame. Bed sections are 10 feet and 5 feet long, bolted together with splice plates and floor supports.
Belt – FS top side, brushed bottom side, with clipper lacing.
Guard rail – 6" high x 16 gauge formed, powder painted steel on both sides, full length of bed sections.
Underside guards – Formed 16 gauge pans full length of bed sections, removable, secured with TEK screws.
Tail pulley – 4" or 6" diameter (see chart) crowned with 1 3/16" diameter shaft.
Drive pulley – 4", 6" and 8" diameter crowned and fully lagged. 4" and 6" diameter pulleys have 1 3/16" diameter shaft, 8" diameter pulley has 1 7/16" diameter shaft.
Snub-roller – 2" diameter for 4" and 6"diameter pulleys, 2 1/2" diameter for 8" diameter pulley.
Return rollers – 1.9" diameter placed on 10' centers.
Floor supports – Adjustable 30" to 44" from floor to top of belt. One floor support provided at each end of conveyor and at each bed joint.
Take-up – 6" long screws located at tail pulley to provide belt tension.
Bearings – Sealed, prelubricated with cast iron housings.
Speed reducer – C-face mounted heavy duty worm gear reducer.
Capacity – 10 pounds per foot maximum live load. See load Capacity.