Hand Operated Blade/Roller Stop
Hand Operated Stops are used where manual line control is required such as assembly work stations, shipping areas etc. Can be mounted to underside of models 138SR, 190SR, 20SR, 190CAp, 138CAP and 190ZPA.
Capacity – Blade - 150 lb, 1 3/8" diameter roller - 50 lb, 1.9" dimater roller - 150 lb. All are live capacities at 60 fpm.
Bearings – High capacity (2) bolt flange bearings.
Operation – Hand operated lever to raise or lower stop can be used in normally up or down positions.
Blade – 7 gauge formed angle 1" x 1 1/2" for 1 3/8" conveyors - 1 1/2" for 1.9" and 2.0" conveyors.
Roller – 1 3/8" diameter x 18 gauge galvanized steel roller for 1 3/8" conveyors. 1.9" diameter x 16 gauge galvanized steel roller for 1.9" and 2.0" conveyors.
Stroke – 2" above rollers.
Capacity – Blade - 150 lb, 1 3/8" diameter roller - 50 lb, 1.9" dimater roller - 150 lb. All are live capacities at 60 fpm.
Bearings – High capacity (2) bolt flange bearings.
Operation – Hand operated lever to raise or lower stop can be used in normally up or down positions.
Blade – 7 gauge formed angle 1" x 1 1/2" for 1 3/8" conveyors - 1 1/2" for 1.9" and 2.0" conveyors.
Roller – 1 3/8" diameter x 18 gauge galvanized steel roller for 1 3/8" conveyors. 1.9" diameter x 16 gauge galvanized steel roller for 1.9" and 2.0" conveyors.
Stroke – 2" above rollers.
Item # |
|---|