• Accumulates tote pans, cartons, boxes etc.
• Minimum back pressure

Bed – 7" x 1 1/2" x 12 gauge powder painted formed steel channel frame,bolted together with butt couplings and floor supports.
Tread rollers – 1.9" diameter x 16 gauge galvanized steel rollers spaced on 2 1/4", 3", 4 1/2" or 6" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure rollers – 1.9" diameter x 16 gauge galvanized steel rolled spaced on 6:, 9",= or 12: centers, cam adjusted.
X-bracing – Frame squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.
Tail pulley – 4" diameter crowned with 1 3/16" shaft.
Snub roller – 2 1/2" diameter adjustable, located directly behind drive pulley. 2" diameter at each end directly behind terminal pulleys.
Return idlers – 1.9" diameter adjustable on 10' 0" centers.
Floor supports – 31 1/2" to 45 1/2" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bedjoint.
Take-Up– Located in center drive, provides 24" of belt take-up.
Bearings – Sealed and pre-lubricated with cast iron housings.Speed reducer – C-face mounted heavy duty worm gear reducer.