• Oily conditions
• Pallets
• Drums
• Positive drive

Bed – 2 1/2" diameter x 11 gauge steel tread rollers, 11/16" hex shaft. Tread rollers mounted in 4" and 6" x 4 gauge powder painted formed steel channel frame. Sections are bolted together with butt couplings and floor supports.
Drive chain – No. 50 circular roller chain.
Floor supports – Heavy duty supports are adjustable 30 1/4" to 40" from floor to top of roller. One support at each end of conveyor and one center leg with knee brace.
Center drive – Mounted underneath conveyor.
Bearings – Sealed, prelubricated ball bearings.
Chain guard – Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to totally enclose drive chain.
Speed reducer – Heavy duty worm gear C-face mounted.

Available Options
- Side Mounted Drive: Motor/Reducer unit can be mounted to side of conveyor frame for lower elevations. Drive is higher than conveyor frame.
- Conveyor Speed: 30 feet per minute is standard. Other constant, and variable, speeds are available.
- Rollers Set Low: Rollers can be set low in conveyor frame to provide a guard rail effect.