Chain Driven Live Roller Curve 52", CHAIN DRIVEN LIVE ROLLER CURVE

Conveying Surface Width 52 in
Width between Rail 55 in
Overall Bed Width 58 in
Outside Radius R 99 º
Inside Radius IR 44 º
Number of Rollers 21
Weight 1098 lb
Motor 3/4 hp 230/460-3-60 TE motor
Speed Constant 30 fpm
Capacity1 4000 lb
Note 1Capacity distributed live load.
  • Oily conditions
  • Pallets
  • Drums
  • Positive drive


Bed – 2 1/2" diameter x 11 gauge steel tread rollers, 11/16" hex shaft. Tread rollers mounted in 4" and 6" x 4 gauge powder painted formed steel channel frame. Sections are bolted together with butt couplings and floor supports.
Drive chain – No. 50 circular roller chain.
Floor supports – Heavy duty supports are adjustable 30 1/4" to 40" from floor to top of roller. One support at each end of conveyor and one center leg with knee brace.
Center drive – Mounted underneath conveyor.
Bearings – Sealed, prelubricated ball bearings.
Chain guard – Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to totally enclose drive chain.
Speed reducer – Heavy duty worm gear C-face mounted.

Available Options
- Side Mounted Drive: Motor/Reducer unit can be mounted to side of conveyor frame for lower elevations. Drive is higher than conveyor frame.
- Conveyor Speed: 30 feet per minute is standard. Other constant, and variable, speeds are available.
- Rollers Set Low: Rollers can be set low in conveyor frame to provide a guard rail effect.