• Wash down operations
• Oily conditions
• Positive drive – no belt slippage

Drive Chain – No. 40 roller chain on straight sections.
Bed – 3 1/2" x 1 1/2" x 10 gauge powder painted formed steel channel on one side, 5" x 1 1/2" x 10 gauge formed steel channel on chain drive side. Sections are bolted together with butt couplings and floor supports.
Tread rollers – 2" diameter x 12 gauge steel with #40 sprockets welded to roller tube, 7/16" hex shafts. Rollers spaced on 4", 6", 8" and 12" centers. Rollers are roller to roller driven.
Chain guard – Chain guard is mounted to frame to totally enclose drive chain.
Center drive – Mounted underneath conveyor, near center of section. Can be placed most anywhere in conveyor length. Specify.
Floor supports – Adjustable 28" to 42" from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Speed reducer – C-face mounted heavy duty worm gear reducerCapacity – Maximum load 150 Ibs. per foot; maximum unit load 500 pounds. Not to exceed Load capacity.