Auto-Sort Air Operated Wheel Diverter

Motor 1/2 hp 230/460-3-60 TE motor
Max. Capacity Package Weight 75 lb
Speed Constant wheels 180 fpm
Package size – Min. 6" wide x 9' long, max. 25" wide x 36' long.
Cycles – Up to 40 times per minute.
Mounting – Mounts in "190LS" conveyor. Being modular in design, it can be located almost anywhere in length of conveyor. Specify right hand or left hand operation.
Diverting wheels – Consists of a double row of 3" diameter wheels spaced proportionately across conveyor width. Driven by high capacity poly belts by it's own drive. May also be slave driven consult factory.
Supports – Minimum elevation 21. Specify height conveyor will be installed.
Air cylinder – 2" bore x 1" stroke double acting.
Air requirements – Min. pressure 60 psi, maximum 125 psi. Free air consumption at 60 psi - .018 cu. ft. per cycle.
Valve – Single solenoid 4 way valve. 1/4" - 20 NPT valve ports.
Electrical requirements – 120 V, single phase, 60 Hz, current draw .07 amps or 24 VDC.
Speed reducer – Heavy duty worm gear, C-face.
Electrical controls – Not furnished as standard equipment.

Installation note: To eliminate contaminants in air supply line, a filter, regulator (FR) should be installed prior to valve.