Air Operated Chain Transfer
Chain – Two strands of #60 high side bar roller chain; min. 10" chain centers.
Mounting – Designed to install in standard "251CRR" frames.
Cycles – Up to 4 cycles per minute.
Air requirements – Min. pressure 60 psi, max. pressure 125 psi. Free air consumption at 60 psi .035 cu. ft. per cycle.
Electrical requirements – 120 V, single phase, 60 Hz. Current draw - .07 amps or 24 VDC.
Electrical controls – None furnished as standard.
Installation note: To eliminate contaminants in air supply line, a filter, regulator (FR) should be installed prior to valve.
Mounting – Designed to install in standard "251CRR" frames.
Cycles – Up to 4 cycles per minute.
Air requirements – Min. pressure 60 psi, max. pressure 125 psi. Free air consumption at 60 psi .035 cu. ft. per cycle.
Electrical requirements – 120 V, single phase, 60 Hz. Current draw - .07 amps or 24 VDC.
Electrical controls – None furnished as standard.
Installation note: To eliminate contaminants in air supply line, a filter, regulator (FR) should be installed prior to valve.
Sort by
Display
per page
Item # |
|---|
| Air Operated Chain Transfer |