Belt Width
|
Standard widths
|
Bearing
|
Heavy duty pillow block, sealed and regreasable
|
Belt Speed
|
0–50 fpm in 5 fpm increments
|
Sprockets
|
6 tooth, 18 in PD.
|
Guards
|
Metal guards, totally enclosed, painted safety yellow
|
Curves
|
20 º 25 º 30 º 35 º 40 º 45 º 60 º
|
Support
|
Vertical - 6 in WF I-Beam, horizontal - 5 in I-Beam
|
Oiler
|
Multi-brush gravity feed, manual
|
- Custom engineering and manufacturing
- Heavy duty construction
- 2 1/2 in, 4 in, 6 in and 9 in pitch belts available
Belt – 2 1/2 in pitch plain metal belt. Belt pull 2500#. Pan thickness, 0.125 in.
Belt widths – Belt may be furnished from 4 1/2 in minimum to 36 in maximum in 1/2 in multiples.
Frame – Closed style, 10 gauge formed steel. Upper/lower tracks, 2 in x 1 1/4 in angle.
Motor & reducer – 115/220 V, 60 Hz single phase or 230/460 V, 60 Hz 3 phase; TEFC motor, reversible.
Optional equipmentCleats – 1 1/2 in high, 1/4 in flat stock (perforated cleats also available).
Variable speed – Available in 10–30 fpm.
Electrical controls – 1 or 3 phase, on-off switch, forward-off-jog reverse switch and thermal overload protection.
Casters – 4 in diameter, both rigid and swivel with locks.
Belt apron – Plain, pimpled or pimpled and perforated.
Min. lower horizontal = 2 ft (ref.)
Min. upper horizontal = 1 ft 6 in (ref.)