Drive Chain Type
|
251 CRR
|
Conveyor Length
|
15 ft
|
Conveying Surface Width
|
52 in
|
Width between Frames
|
55 in
|
Overall Width
|
58 in
|
Weight
|
1329 lb
|
Standard Color
|
ACSI Green ACSI Gray ACSI White ACSI Dark Blue ACSI Tan ACSI Black
|
Motor
|
3/4 hp 230/460-3-60 TE motor
|
Speed Constant
|
30 fpm
|
Note
|
1Based on 5" Roller Centers
|
- Oily conditions
- Pallets
- Drums
- Positive drive
Bed – 2 1/2" diameter x 11 gauge and 2 5/8" x 7 gauge steel tread rollers, 11/16" hex shafts. No. 50 chain is used on 5", 7 1/2", 10" roller centers only. No. 60 chain is used on 6", 7 1/2", and 12" centers only. Tread rollers mounted in 4" and 6" x 4 gauge powder painted formed steel channel frame. Sections are bolted together with butt couplings and floor supports.
Drive chain – No. 50 roller chain or No. 60 roller chain can be used with either the 251CRR or 267CRR as above.
Floor supports – Heavy duty supports are adjustable 30 1/4" to 40" from floor to top of roller. One support at every bed joint and each end of conveyor.
Center drive – Mounted underneath conveyor, center of section. Can be placed most anywhere in conveyor length.
Bearings – Sealed, prelubricated ball bearings.
Chain guard – Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to totally enclose drive chain.
Speed reducer – C-face mounted heavy duty worm gear reducer.
Capacity – Maximum load per linear foot of conveyor; 300 lbs. with supports on 10' centers, 1000 lbs. with supports on 5' 0" centers.
Available Options- Side Mounted Drive: Motor/Reducer unit can be mounted to side of conveyor frame for lower elevations. Drive is higher than conveyor frame.
- Conveyor Speed: 30 feet per minute is standard. Other constant, and variable, speeds are available.
- Rollers Set Low: Rollers can be set low in conveyor frame to provide a guard rail effect.