190LSC-36", LINE SHAFT DRIVEN LIVE ROLLER CURVES

Width bethween Rail 33 in
Overall Frame Width 36 in
Radius at 90º 48 in
Total Number of Rollers at 90º 30T
Total Number of Rollers at 60º 20T
Total Number of Rollers at 45º 15T
Total Number of Rollers at 30º 10T
Weight at 90º 430 lb
Weight at 60º 370 lb
Weight at 45º 309 lb
Weight at 30º 246 lb
Standard Color ACSI Green
ACSI Gray
ACSI White
ACSI Dark Blue
ACSI Tan
ACSI Black
Bed – Roller bed with 2 1/2" diameter tapered to 1 11/16" diameter x 14 gauge galvanized and 1.9" diameter x 16 gauge galvanized tread rollers. Mounted in 7" x 12 gauge powder painted formed steel channel frame.
Floor supports – Adjustable 31 1/2" to 45 1/2" from floor to top of rollers. One support at ends of 190LSC (Curve), 190LSCS (Curve Spur) and 190LSS (Straight Spur). Single leg supplied for center of outside rail on 90° 190LSC only.
Slave driven – Curves or spurs are slave driven from drive shaft of Model 190LS conveyor. Shafts are coupled by chain coupling at bed joints.
Drive Shaft – 1" diameter steel shaft extends full length of conveyor, coupled with universal joints ("U" joints) at necessary intervals.Drive spools – 2" diameter Delrin spool held in place on drive shaft with "snap-on" lock collars.
Drive guard – Underside of drive shaft with spools and drive belts guarded full length of conveyor.
Drive belts – 3/16" diameter urethane belt from drive spool to tread roller.
Bearings – Tread rollers, pre-lubricated ball bearings. Sealed, prelubricated, self-aligning ball bearings on drive shaft.
Butt couplings – Standard for connecting to 190LS.