190CLRS-27", V-BELT DRIVEN LIVE ROLLER SPURS

Type Curve Spur
Overall Width 30 in
Width bethween Frames 27 in
A at 45º 62 1/2 in
A at 30º 69 1/2 in
B at 45º 65 5/8 in
B at 30º 95 5/8 in
Radius 32 1/2 in
Motor 1/2 hp 230/460-3-60 TE motor
Belt Speed 60 fpm
Capacity 540 lb
Weight at 45º 380 lb
Weight at 30º 405 lb
  • Diverging or converging applications
  • Positive alignment of package
  • Right and Left Hand Units Available

Driving Belt - "B" section V-belt.
Bed- Roller bed width between rails 15", 21", 27", 33" and 39". 7-1/2" x 1-1/2" x 12 gauge powder painted formed steel channel frame.
Tread Rollers - 2-1/2" diameter tapered to 1-11/16" diameter plated and 1.9" diameter x 16 gauge plated steel tread rollers, 7/16" hex shaft.
Pressure Sheaves - 3" diameter x 3/8" bore, adjustable to give required driving force.
Take-Up - Screw take-up provided to insure proper V-belt tension. Mounted underneath conveyor.
Tangent - 12" long, on one end of curved spur.
Floor Supports - Adjustable 31-1/2" to 45-1/2" from floor to top of rollers.
End Drive - Mounted below bed section.
Bearings - Sealed prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - 540 Ibs. total distributed live load.